SunStar SPS/A-Pattern Series - Page 96

96
A. Press MODE key.
※Caution
If READY LED turns on or upper feed plate is
under, some keys are not available. It happened,
operate the keys after lifting the upper feed plate
or pressing ENTER keys.
B. Press ENTER key.
C. If you press ENTER key, you can get the
screen like a figure on the right side. You can
confirm the date when the system program was
made.
※ Here XXXX means machine model.
D. Press any key to confirm the version, then back
to the initial screen by pressing ESC key.
<< Main Menu >>
0. Initialize
1. Parameter Set
2. Program
<< Initialize >>
0. S/W Version
1. Para. Init.
2. Sys. UpDate
<< Main Menu >>
0. Initialize
1. Parameter Set
2. Program
S/W Version
2000/01/02-XXXX
Press Any key
4-8) Confirmation for Version of System Program