7-48
Press to check if the original
design is separated. Move the cursor
to #35.
16) 10898
17) 55961
35) 1000
36) 17294
■■
DESIGN FILTERING: Optimizing the selected design
Ex) Editing the design in memory #5: setting the minimum stitch width at over 0.3mm and storing it in memory #17
(number of stitches: 18294)
Call the design in #5 and press
1. STITCH EDIT
2. DESIGN DIVIDE
3. DESIGN FILTERING
Place the cursor at “3.DESIGN
FILTERING”and press
DESIGN FILTERING
LENGTH = 0.1 [mm]
Move the cursor and input 0.3mm
Press
DESIGN FILTERING
LENGTH = 0.3 [mm]
To Next Page
Loading...
