7
WELDING ATTACHMENTS
WELDING ATTACHMENT OPTIONS
In order to create welds, a weld head or hand-held attachment is needed to deliver the weld energy to the weld
spot. There are several different types of weld heads and hand-held attachments to choose from. Selecting
the best option will depend on the production rates involved, part access and geometries, and available
budgets. We offer a large selection of weld heads and hand attachments to choose from (See BELOW).
Contact Sunstone Engineering to further discuss these options.
WELD HEAD ATTACHMENTS:
• Parallel
• Opposed
HAND-HELD ATTACHMENTS:
• Single Probe
• Dual Probe
• Tweezers
PG2 PISTOL GRIP:
• Micro-switch controlled
• 300 grams weight
• 10mm diameter with 3/8” thread.
PG2 PISTOL GRIP WITH ROLL-SPOT:
• Same specs as PG2 Pistol Grip
• Includes Copper Wheel and attachment
PG3 MEDIUM DUTY:
• Micro-switch controlled
• 450 grams
• 1/2” taper electrode
PG5 – TWEEZER HAND PIECE:
• Micro-switch controlled
• Ergonomically designed pliers
PG6 HEAVY DUTY:
• Pressure actuated
• Cast aluminum body with adjustable spring-loaded action
• 1/2” electrode tips, water cooled
• For use with higher-powered AC welders (5kVA, 15kVA).
To Next Page