FORM NO. 660769 REV. C PAGE 32
Wind Guide
2-P
Wind Guide Installation
Steps:
1. Apply anti-seize to all screw threads before installing nuts.
2. Attach elbow to inside of starboard shark fin with screws, washers and nuts as shown.
3. Slide straight pipe over end of elbow on starboard side as shown.
4. Insert second elbow on opposite end of straight pipe.
5. Rotate elbow to align holes with inside of port shark fin.
6. Properly torque all nuts.
Screw Button Head
SS, 5/16 x 1.5”
4 Places
Nut SS, 5/16
4 Places
Washer SS,
5/16, 4 Places
Elbow
2 Places
Straight Pipe
To Next Page