Sunstream SWIFTSHIELD A Series - Cover Installation and Adjustment; Feeding Keder Bead onto Roller

52 pages

To Next Page

To Previous Page

FORM NO. 660769 REV. C PAGE 34

Step 3

* Hydraulic hoses not shown.

3-A

Installing and Adjusting the Cover

Steps:

1. With SwiftShield™ arms and roller at a manageable height above swim platform

(~5’).

2. Locate the Keder Bead (Bolt rope) sewn into the tail end of cover.

3. Locate slot in roller. Rotate roller to align slot with notch in fin plate.

4. Feed Keder Bead onto Roller through notch in the Fin Plate.

Fin Plate

Notch

Slot