© by WilTec Wildanger Technik GmbH Item 50105, 50123, 50977–50980, 50121, 51042–51044 Page 13
http://www.WilTec.de
http://www.aoyue.eu 09 2021-1
http://www.teichtip.de
Other notes and remarks:
• Before every commissioning of the filter the user should check if sealings and connections are
fitted correctly.
• Pressure pond filters are exclusively designed for filtering pond water with typical impurities.
• Do not expose the filter to the direct sun light over a longer period.
• By frost the filter has to be completely emptied, if necessary, dug out and stored in a dry, frost-
free place.
• After work that requires the removal of the lid, please make sure when attaching the cover lid
that the sealing rings are fitted correctly! Fit the clamp ring around the lid, press on the cover lid
and close the sealing clam.
CPF-180-250
CPF-280-380-500
CPF-2500-5000-10000-15000-20000-30000
To Next Page
Loading...
Need help?
General
