SUN-BATT-5.12 | User Manual10
3.3. Tools
Tools
Installation
Knife Measuring tape Socket wrench (10/16mm)
Rubber mallet Cross Screwdriver Hammer drill (8mm)
Protection
ESD gloves Safety goggles Anti-dust respirator
Safety shoes
3.4. Installation Requirements
3.4.1. Installation Environment Requirements
Install the battery in the indoor environment.
Place battery in secure location away from children and animals.
Do not place the battery near any heat sources and avoid sparks.
Do not expose the battery to moisture or liquids.
Do not expose the battery to direct sunlight.
3.4.2. Installation Carrier Requirements
Only mount battery on re resistant building. Do not install batteries on ammable buildings.
Battery is quite heavy, make sure the wall/ground can meet the load bearing requirements.
To Next Page
Loading...
Need help?
General
