SunSynk SUN-BATT-5.12 User Manual

SUN-BATT-5.12 | User Manual8
3. INSTALLATION GUIDE
3.1. Checking Before Installation
3.1.1. Checking Outer Packing Materials
Packing materials and components may be damaged during transportation. Therefore, check the outer pack-
ing materials before installing the battery. Checking the surface of packing materials for damage, such as holes
and cracks. If any damage is found, do not unpack the battery and contact the dealer as soon as possible. You
are advised to remove the packing materials within 24 hours before installing the battery.
3.2. Checking Deliverables
After unpacking the battery, check whether deliverables are intact and complete. If any damage is found or any
component is missed, contact the dealer.
The below table shows the components and mechanical parts that should be delivered.
Start
END
Check Before
Installation
Prepare
Installation Tools
Determine The
Installation Position
Electrical
Connection
Install Wall
Bracket
Install Battery
Carton
Hanging bracket
1 Hanging bracket
2W all bracket
Pearl wool
Battery
Pearl wool

SunSynk SUN-BATT-5.12 Specifications

General

Brand	SunSynk
Model	SUN-BATT-5.12
Category	Camera Accessories
Language	English