SmartStart
SmartStart anticipates the time required to provide a scheduled temperature by the start of an event. When
Smart Start is set to Off, additional time is required to reach the set temperature.
Program
Set to On to follow the schedule. Set to Off to use the same temperature all of the time.
Display Menu
The Display menu allows you to customize preferred display units, brightness, color themes and language options. A
Clean Screen feature enables cleaning without affecting operation.
Toolbox Menu
Error
If there is currently an error, it will display as the first item.
Heat Hours
Displays the heating duration by day or month.
Room Offset
This feature can offset operation to account for over or under heating present at the sensor location.
Software Version
Displays product software version. Load Defaults
Select ‘yes’ to reload the factory default settings.
Troubleshooting Guide
It is strongly recommended that a qualified, licensed electrician install the heating cables and related electrical
components. If problems with the system arise, please consult the troubleshooting guide below.
Warning
Any electrical troubleshooting work should be performed with the power removed from the circuit, unless otherwise
noted.
To Next Page
Loading...
