17
Speed-Bag + optional cockpit installation.
7 : Cockpit installation : engage the plastic
buckles on the cockpit and harness’s right
side ( beneath the carabiner ).
8 : Position the Velcro at
the cockpit’s center.
Front Back
Push the closing Speed-bag strap through the cockpit
loop strap.
4 : Go around the carabiners with
the carabiners connectors ( H ).
5 : Speed-bag tension straps ( E ) : left side : unfasten
the plastic buckle, push the cord through the grommet
below the carabiner and make a “Girth hitch” knot again
on the plastic buckle.
6 : ( E ) : left side : unfasten the plastic buckle,
push the cord through the grommet below the
carabiner and through the Speed-Bag grom-
met, then make a “Girth hitch” knot again on
the plastic buckle.
In ight : the cockpit tilt can be loc-
ked in place using the retaining strap
to be fastened behind the chest-strap.
To Next Page
Loading...
