EasyManua.ls Logo

Super Circuits WL-N16P User Manual

Default Icon
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Network Video Recorder
User Manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Super Circuits WL-N16P and is the answer not in the manual?

Super Circuits WL-N16P Specifications

General IconGeneral
ModelWL-N16P
CategoryNetwork Hardware
Frequency Band2.4 GHz
Maximum Data Rate150 Mbps
SecurityWEP, WPA, WPA2
Wireless StandardIEEE 802.11n

Summary

Chapter 2 Getting Started

2.1 Starting Up and Shutting Down the NVR

Procedures for powering the NVR on, off, and rebooting it correctly.

2.2 Activating Your Device

Initial device activation by setting an administrator password.

2.5 Adding and Connecting the IP Cameras

Steps to add and connect IP cameras to the NVR for video monitoring.

Chapter 5 Recording and Capture Settings

5.3 Configuring Motion Detection Recording and Capture

Setting up motion detection parameters and configuring recording actions.

Chapter 6 Playback

6.1 Playing Back Record Files

How to play back recorded video files using various search methods.

Chapter 7 Backup

7.1 Backing up Record Files

Procedures for exporting and backing up recorded files to external devices.

Chapter 8 Alarm Settings

8.1 Setting Motion Detection Alarm

Configuring motion detection parameters and alarm response actions.

8.6 Setting Alarm Response Actions

Defining how the system responds to alarms, including display and notifications.

Chapter 9 VCA Alarm

9.3 Line Crossing Detection

Configuring virtual lines for detecting objects crossing specified paths.

Chapter 11 Network Settings

11.1 Configuring General Settings

Configuring basic network parameters like IP address and working mode.

Chapter 13 HDD Management

Chapter 15 NVR Management and Maintenance