Super Systems 31095 - Commands: Tuning Control; Fuzzy Tune Start-up

275.0
274.8
Menu
Tune
tune
tune
no
tune
yes
no
61
6 - Commands
6.1.5 TUNE RUN / STOP
Operator
mode
Tuning
menu
This controller is provided with
2 different Tuning algorithm:
• Fuzzy tune (one shot tune)
for calculating the optimal PID
term parameters.
• Adaptive Tune (continuous tune)
for a continuous calculation of
the PID term parameters.
press until
Confirm
yes
to start
Confirm
no
to stop
The command start/stop
is executed pressing the
è key.
When the controller is
calculating the PID
parameters, the green
Ä led is ON.
Fuzzy Tune
start-up
After the execution of the tuning, the
calculated values are automatically
presented in the PID menu.
Press until
X5-SSI-uk 18-03-2009 17:54 Pagina 61