Super Systems 31095 User Manual

X5-SSI-uk 18-03-2009 17:53 Pagina 1
Temperature Controller
I 1 I 2 I 3
45.80
45.80
50
Instruction manual
PN 31095
PN 31097
Super System inc.
7205 Edington Drive
Cincinnati, Ohio 45249
United States
Phone: 513-772-0060
Toll free: 800-666-4330
Fax: 513-772-9466
www.supersystem.com
Model No. 31095 and 31097

Super Systems 31095 Specifications

General

Brand	Super Systems
Model	31095
Category	Temperature Controller
Language	English

Summary

Installation

Panel Cut-Out Specifications

Required dimensions for panel mounting.

Instrument Installation Procedures

Instrument Removal Steps

Step-by-step guide for safely removing the instrument.

Electrical Connections

Supply and Output Wiring

Diagrams for connecting power supply and output signals.

Electrical Connections: Digital Inputs

Digital Input Configuration

Setting up and using digital inputs.

Electrical Connections: Control Outputs

Triac Control Output

Details on Triac control output wiring.

Electrical Connections: Motor Positioner

Motor Positioner Output Types

Information on motor positioner outputs (Triac/Relay).

Electrical Connections: Serial Communication

Serial Communication Setup

Configuring serial communication options.

Operation and Configuration

Configuration Password Entry

Steps to enter the configuration password.

Operation: Retransmission

Retransmission Signal Configuration

Operation: Alarm Configuration

Alarm Parameter Configuration

Operation: Alarm Functions

Alarm Acknowledge Functionality

Operation: Alarm Features

Loop Break Alarm (LBA) Function

Details on the Loop Break Alarm feature.

Operation: Menu Navigation

Operation: Menu Access

Accessing Configuration Menu

Operation: Setpoint Management

Setpoint Menu Parameters

Operation: Timer Functions

Timer Action Configuration

Operation: Alarm Details

Alarm Hysteresis Settings

Operation: Input Menu

Input Menu Parameters

Operation: Communication Menu

Operation: Setpoint Adjustments

Setpoint Bias and Ratio

Tuning Procedures

Input Signal Processing

Input Filter Configuration

Control Algorithm Parameters

Heat/Cool Deadband Setting

Displays and User Views

Fast View Parameter Access

Quick access and modification of parameters.

Commands and Modes

Manual Mode Operation

Controlling the device in manual mode.

Commands: Setpoint Selection

Stored Setpoint Selection

Commands: Tuning Control

Fuzzy Tune Start-up

Initiating the Fuzzy Tune process.

Commands: Remote Operation

Remote Setpoint Control

Technical Specifications

General Technical Data