Super Systems 31095 - Page 71

Factory default parameters
71
OP.r
Control output maximum speed OFF
St.OP
Soft start output high value OFF
St.tM
Soft start time 10
M.t
Output minimum step Servomotor 60
M.hy
Output minimum step Servomotor 0.5
d.bnd
Heat/Cool Dead band 0.5
tc.C
Cool cycle time 5.0
OP.C.H
Cool output maximum value 100.0
OP.rC
Cool output maximum speed OFF
Add.S
Communication SLAVE address 247
dr.S
SLAVE Baud rate 9600
Pro.S
SLAVE Communication protocol MBUS
Par.y
Parity NONE
MaSt
Enable MASTER NO
dr.M
MASTER Baud rate 9600
Pro.M
MASTER Communication protocol MBUS
Add.P
PROFIBUS DP address 3
C.PAS
Configuration password 33
Parameter Parameter Name Default value User settings Notes
SSI.fm Page 71 Friday, December 12, 2008 5:04 PM