(2) Standards on periodic inspection
(A) Establishing dates of periodic inspection.
(B) Establishing inspection and maintenance methods.
(a) Inspecting period.
(b) Person in charge of the inspection.
(c) Inspection site.
(d) Tools and devices for inspection.
(e) Establishment of permissible limit of use.
( f) Explicit designation of maintenance and repair methods.
3. Manufacturer’s inspection method
Our company’s inspection procedures are as follow.
Check for
(1) Movements.
(2) Wear, loss, and/or clogging of/at the teeth of the cam and screw.
(3) Deformation of main body.
(4) Deformation of shackle.
(5) The status of bolts, pins, links and springs.
(6) Deep scratches in general.
(7) Other checking items based on the Standards.
9
To Next Page
Loading...