Super SCC - Daily Inspection

CAUTION:
■
OTHER:
■
DAILY INSPECTION:
■
Use within the rated capacity.
Use within the clamp range.
Do not use for any objects other than steel materials.
Do not use for hard (30 HRC or higher) load.
Lifting is not allowed for a load tapering down in upward direction.
Do not apply shock to the load or lifting clamp.
Do not lift more than one plate.
Before using the product, be sure to check for clogging and wear of the
teeth of the cam, screw and any other parts.
Do not alter. Heating, modifying, etc. will significantly reduce the quality
(strength).
◆
◆
◆
◆
◆
◆
◆
◆
◆
Inquiries for Repair Parts and Repair.
If repair parts or repairs are required, stop using this clamp and contact
your distributor.
◆
Conduct daily checks and maintenance to prevent the loss of safety and
efficiency.
1. Check that there are no cracks at the body, cam, or wire rope holes.
2. Check if the movement and lubrication condition of each part are good.
3. Check for wear, loss, or clogging of the teeth of the cam and screw.
4. Refer to other inspection standards.
17