Superchips 1815 - Setting the Screen Contrast; Setting the Screen Backlight; Performance Tuning; Quick Start - Read & Program My Vehicle Now

Page 7 of 24 Form 0159J 1815 03/10/2008 Superchips Inc.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
FLASHPAQ Overview and Setup
¾ About
*** Press DOWN to scroll as needed ***
 From the Opening screen
1) Press ENTER – after selection of FLASHPAQ Setup
2) Press ENTER – after selection of About
Screen Displays:
• Product description
• Product part number
• “Operating software” Firmware Version #
Visit www.superchips.com
for latest updates
• “Calibration (Tuning File)” Database Version #
Visit www.superchips.com
for latest updates
• Product Serial Number
3) Press OK – Returns to the previous screen
4) Press EXIT – Returns to the Opening screen
¾ Setting the Screen Contrast
 From the Tuner Setup Screen
1) Press ENTER – after selection of Set Contrast
2) Press DOWN/UP & SAVE – adjusts screen contrast to increase
or decrease (text/graphics darkness)
¾ Setting the Screen Backlight
 From the Tuner Setup Screen
1) Press ENTER – after selection of Set Backlight
2) Press DOWN/UP & SAVE – adjusts screen Backlight to
increase or decrease (screen brightness)
3) Press EXIT – returns to Opening screen
Page 8 of 24 Form 0159J 1815 03/10/2008 Superchips Inc.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Performance Tuning
¾ Quick Start – Read & Program my vehicle NOW!!!
*** Press DOWN to scroll as needed ***
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Read Vehicle
3) Press ENTER – after selection of Read Stock
4) Press OK – Begin with the Ignition OFF
5) Follow ON SCREEN – Prompts including Vehicle Ignition
ON/OFF/ON requests (DO NOT START VEHICLE!!)
6) Press EXIT – returns you to previous screen
 From the Performance Tuning screen
1) Press ENTER – after selection of Change Setup
2) Press ENTER – after selection of Power Level
3) Press SAVE – after selection of the tuning level
4) Press EXIT – returns you to the previous screen
 From the Performance Tuning screen
1) Press ENTER – after selection of Program Vehicle
2) Follow ON SCREEN – Prompts including Vehicle Ignition
OFF/ON requests (DO NOT START VEHICLE!!)
Upon completion, remove cable from vehicle
Your vehicle is now programmed with Superchips tuning!
You may now start your vehicle.