superior pump 91046 User Manual (English)

Questions and Answers:

C
Cody SmithJul 29, 2025
What to do if my Superior Pump Water Pump does not start?
- T
  Thomas HooverJul 29, 2025
  If your Superior Pump Water Pump doesn't start, first ensure it's properly plugged in and the switch or breaker is on. Also, check for blown fuses, tripped circuit breakers, or tripped GFCI outlets and replace/reset them as needed. If the motor thermal protector has tripped, let the pump cool down to reset automatically. Insufficient water level or a clogged switch housing could also be the issue; ensure adequate water level or clean the clog.
P
Patrick ReillyAug 3, 2025
What to do if Superior Pump Water Pump runs but no water is coming out?
- A
  aclarkAug 3, 2025
  If your Superior Pump Water Pump runs but isn't moving water, the intake screen or discharge hose/pipe might be clogged. Clean or replace the screen, and remove any clogs from the hose/pipe. If the discharge hose/pipe is frozen, allow it to thaw. Also, verify the supply voltage and wire size, increasing if necessary, and reduce the extension cord length. Inspect for worn, damaged, or clogged pump parts, cleaning or replacing them as needed.
V
Victor LopezAug 8, 2025
Why my Superior Pump Water Pump is not starting?
- M
  Michael FitzgeraldAug 8, 2025
  The Superior Pump Water Pump may not start due to several reasons: it might not be plugged in, or the switch/breaker could be off. Blown fuses, tripped circuit breakers, or tripped GFCI outlets can also prevent it from starting. Additionally, the motor thermal protector might have tripped, or the water level may be too low. A clogged switch housing could also be the culprit.
J
John GonzalezAug 13, 2025
Why is my Superior Pump Water Pump running but not pumping water?
- S
  seanjonesAug 13, 2025
  If your Superior Pump Water Pump is running but not moving enough water, it could be due to a clogged intake screen (clean or replace it), a clogged discharge hose/pipe (remove the clog), or a frozen discharge hose/pipe (allow it to thaw). Low line voltage or an improperly sized extension cord may also be the cause. Check for worn, damaged, or clogged pump parts and address accordingly. Also, the discharge head might exceed the pump's capacity.
N
Nicole CunninghamAug 18, 2025
How to fix Superior Pump Water Pump that won't start?
- L
  lewisnancyAug 18, 2025
  To fix a Superior Pump Water Pump that won't start, begin by plugging it in and ensuring the switch/breaker is on. Replace any blown fuses and reset tripped circuit breakers or GFCI outlets. If the motor's thermal protector tripped, allow the pump to cool down for an automatic reset. If the water level is insufficient, wait until it rises or temporarily invert the pump. Clear any clogs from the switch housing.