superior pump 92900 User Manual

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

OWNER’S MANUAL

INSTALLATION AND

OPERATION INSTRUCTIONS FOR

12 VOLT

BATTERY BACK-UP SYSTEM

Models:

92900, 92910

Table of Contents

Questions and Answers:

R
rachel24Jul 28, 2025
What to do if my superior pump Water Pump won’t run?
- D
  dgutierrezJul 28, 2025
  If your superior pump Water Pump isn't running, there are several potential causes: * **Loose, corroded, or reversed wire connections:** Tighten, clean, or reconnect the wires as needed. * **Discharged battery:** Charge the battery. * **Defective battery:** Replace the battery. * **Blown fuse:** Replace the fuse with a 20 amp fuse. * **Stuck float switch:** Reposition the float so it moves freely. * **Battery discharged below 10 volts:** Fully charge the battery.
A
Angel CruzAug 7, 2025
Why does my superior pump Water Pump run but moves little or no water?
- M
  Maria HannaAug 7, 2025
  If your superior pump Water Pump runs but isn't moving much water, consider these possibilities: * **Low or discharged battery:** Fully charge the battery. * **Obstruction in pipe:** Clear any obstructions in the pipe. * **Discharge pipe height/length exceeds pump capacity:** Check the performance section for the pump's capacity. * **Defective check valve:** Replace the check valve if necessary.
Y
yalvarezAug 17, 2025
Why is my superior pump Water Pump cycling too often?
- J
  James BeckerAug 17, 2025
  If your superior pump Water Pump is cycling too often, it could be due to: * **Float switch positioned improperly:** Reposition the float switch. * **Defective or missing check valve:** Install or replace the check valve.

superior pump 92900 Specifications

General

Brand	superior pump
Model	92900
Category	Water Pump
Language	English

Summary

Safety and Warnings

Electrical Safety Precautions

Details electrical hazards, shock risks, and safe handling of the pump and charger.

Battery Acid Handling

Carbon Monoxide (CO) Detectors

Installation Requirements

Installation Procedure

Back-up Pump Mounting

Plumbing and Float Switch Installation

Float Switch Adjustment

Guidance on positioning and securing float switches for proper pump activation levels.

Wiring and Electrical Connections

Connecting Components to Control Panel

Steps for connecting battery leads, pump power cord, float switch, and AC adapter to the control panel.

Testing Pump and Alarm Functions

Testing Your Installation

System Operation

Troubleshooting Guide

Limited Warranty Information

Related product manuals

Preview: superior pump 91025

superior pump 91025

Preview: superior pump 91046

superior pump 91046