Superior B836 - User Manual

For Superior's
Gas Insert
Models
61-3821 N
GI-3821 P
GI-3821 NB
GI-3821 PB
GI-3821 NX
GI-3821 PX
For Use With Superior's
Factory-Built Fireplace
Models
Also For
1Jse With
Solid Fuel Burning
Mzsonry Fireplaces
Fith Opei7irig Widths
From 31" To 46"
And Opening Heights
From 21" To 31"
And Any Other
Solid Fuel Burning
Factory-Built Fireplace
With Minimum Open Width
Of 30%"
And Minimum Height
Of 20%"
11 1 warning: If the information in fll
this manual is not followed ex-
actly, a fire or explosion may
- Do not store or use gasoline or
otherflammablevapors and liq-
uids in the vicinity
of this or any
other appliance.
I I
- WHATTO DO IFYOU SMELLGAS
I I
Do nottryto lightany appliance.
Do not touch any electrical
switch.
Do not use any phone in your
building.
Immediately call your gas sup-
plier from
a neighbor's phone.
Followthe
gassupplier's Instruc-
tions.
If you cannotreachyourgassup-
plier, call the fire department.
- Insfallation and service must be
performed by a qualified in-
staller, service agency or the
gas supplier.
Due to high temperatures, the appliance
should be located out
ol tralfic and away
from furniture or draperies.
Do
not place clothing or other materials
on or near this appliance.
PLEASE RETAIN THIS MANUAL FOR FUTURE
REFERENCE.

Summary

Safety and Emergency Procedures

General Safety Warnings

Important safety precautions regarding high temperatures and flammable materials.

What to Do If You Smell Gas

Immediate steps to take if a gas leak is detected to prevent fire or explosion.

General Information and Installation Types

Safety Precautions

Details essential safety measures to be observed during installation and operation.

Installation Options

Factory-Built Fireplace Overview

Masonry Fireplace Overview

Optional Masonry Fireplace Overview

Fireplace Preparation and Modification

Factory-Built Fireplace Preparation

Steps required to prepare a factory-built fireplace before insert installation.

Fireplace Modification Steps

Sequential steps for modifying existing fireplaces to accept the gas insert.

Modification Procedures

Detailed instructions for removing fireplace components and making necessary alterations.

Prepare Gas Insert for Installation

Modify the Existing Firebox

Gas Insert Installation and Venting

Installing the Gas Insert

Core instructions for placing and securing the gas insert into the prepared fireplace.

Vertical Termination Systems

Details on routing and terminating the vent system through the roof.

Route Vent Ducting

Instructions for feeding the flexible vent ducting through the chimney.

Position Gas Insert within Firebox

Final steps for sliding the insert into the firebox and leveling it.

Appliance Configuration and Operation

Installing the Optional Blower

Gas Line Connection

Steps for safely connecting the gas supply line to the appliance.

Gas Pressure Check

High Elevation Derating

Appliance Operation

Glass Panel Installation

Flame Appearance and Sooting

Adjustment

Accessories, Finishes, and Conversion

Forced Air Kits

Gas Conversion Kits

Steps for converting the appliance between natural gas and propane.

Maintenance, Troubleshooting, and Warranty

Operation and Care of Your Appliance

Maintenance

Gasket Inspection

Troubleshooting the Gas Control System

Common issues and corrective actions for the gas control system.

Lighting Instructions

Step-by-step guide for safely lighting the pilot and main burner.

Superior B836 Specifications

General

Brand	Superior
Model	B836
Category	Indoor Fireplace
Language	English