Supermicro AOC-2UR68G4-i4XTS - Installing Driver for Linux

3-4
Super AOC-2UR68G4-i4XTS and AOC-2UR68G4-i2XT Add-on Card User's Guide
3-5 Installing Driver for Linux
Use the following procedures for installing AOC-2UR68G4-i4XTS and AOC-
2UR68G4-i2XT drivers for the Linux operating system.
1. Download the driver from the Supermicro CDR-NIC LAN driver CD or ftp://ftp.
supermicro.com/Networking_Drivers/CDR-NIC_1.62_for_Add-on_NIC_Cards/
Intel/LAN/PRO40GB/LINUX. Due to the continuous development of the Linux
kernel, the drivers are updated more often than the bundled releases. The
laterst driver can be found on http://downloadcenter.intel.com.
2. Choose the Intel driver package from LAN/PRO40GB/LINUX.
3. Copy the driver to the directory of your choice. For example:
/home/username/i40e
or
/usr/local/src/i40e
4. Untar/unzip archive, where <x.x.x> is the version number for the driver tar le:
tar zxf i40e-x.x.x.tar.gz
5. Change to the driver src directory, where <x.x.x> is the version number for
the driver tar:
cd i40e-x.x.x/src/
make install
This will install the Linux driver to your system. For more driver installation informa-
tion, please refer to the Intel Support Website.