Supermicro AOC-S3108L-H8iR - PD Mgmt (Physical Drive Management)

4-7
Chapter 4: Conguring the Avago MegaRAID Setting
4-5 PD Mgmt (Physical Drive Management)
Press <Ctrl><N> or <Ctrl><P> to select the PD Mgmt menu, as shown below. This
screen provides information about hard drives connected to the selected controller.
The right panel of the screen shows the information about the selected device.
PD Mgmt (Physical Management) Menu Screen
To select a device, use the up arrow, down arrow or <Tab> keys and press <F2>.
Press <Enter> to perform a command, such as rebuilding a failed drive, locating a
drive, or making a drive ofine, as shown below.