Supermicro AOC-S3108L-H8iR - Page 41

6-5
Chapter 6: CacheCade Conguration
5. When the following screen displays, click on Select to select the RAID setting
to congure for your HDDs.
6. Select your desired RAID setting to the hard drive you want to congure.
7. Click on Drive to invoke the pull-down submenu. From the pull-down sub-
menu, select the hard drives you want to congure the RAID setting.
8. With the desired hard drive selected, click on the Add button to add the
selected hard drive to your drive group list.
9. With all hard drives selected, click Next to create a CacheCade drive group.
10. To remove a hard drive from the selected drive group, select the drive you
want to remove and click on Remove to remove it from the list as shown
below.
9
10
8
9
5
6
7