Supermicro AOM-S3108-H8 - Chapter 3 Installation; Static-Sensitive Devices; Precautions; Unpacking

3-1
Chapter 3: Installation
Chapter 3
Installation
3-1 Static-Sensitive Devices
Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid dam-
aging your add-on module, it is important to handle it very carefully. The following
measures are generally sufcient to protect your equipment from ESD.
Precautions
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing the add-on module from the
antistatic bag.
• Handle the add-on module by its edges only; do not touch its components, or
peripheral chips.
• Put the add-on module back into the antistatic bags when not in use.
• For grounding purposes, make sure that your system chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and
the add-on module.
Unpacking
The add-on module is shipped in antistatic packaging to avoid static damage. When
unpacking your component or your system, make sure that you are static protected.
Note: To avoid damaging your components and to ensure proper installa-
tion, be sure to always connect the power cord last, and always remove it
before adding, removing or changing any hardware components.