EasyManuals Logo

Supermicro H11SSL-I User Manual

Supermicro H11SSL-I
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
H11SSL Motherboard Series Motherboard User's Manual
104
ARI Forwarding
If supported by the hardware and set to 'enabled', the downstream port disables its traditional
device number eld, being 0 enforcement, when turning a type1 conguration request into
a type0 conguration request. This permits access to extended functions in an ARI device
immediately below the port. The options are Enabled and Disabled.
PCIe Spread Spectrum
Use this setting to Enable or Disable PCI-E Spread Spectrum for your system.
Target Link Speed
If supported by hardware and set to Force to x.S GT/S (x being a value of 2.5, 5.0 or 8.0) for
Downstream Ports, this sets an upper limit on Link Operational Speed by restricting the values
advertised by the UPstream component in its training sequences. When Auto is selected,
the HW initialized data will be used.
VGA Priority
Use this setting to select between onboard or o󰀨board VGA support The options are Onboard
and O󰀨board
NVMe Firmware Source
Use this setting to select between the AMI Native rmware support or the device vendor-
dened rmware support. The options are AMI Native Support and Vendor Dened Firmware.
M.2 (AHCI) Firmware Source
Use this setting to select between the AMI Native rmware support or the device vendor-
dened rmware support. The options are AMI Native Support and Vendor Dened Firmware.
M.2 HC1 PCI-E 3.0 X4/X2 OPROM
M.2 HC2 PCI-E 3.0 X2 OPROM
RSC-R1UW-2E16 SLOT1 PCI-E X16 OPROM
RSC-R1UW-2E16 SLOT2 PCI-E X16 OPROM
RSC-R1UW-E8R SLOT1 PCI-E X8 OPROM
This setting enables or disables the listed PCI-E Slot OPROM option. The options are
Disabled, Legacy or EFI.
Onboard LAN
Use this setting to enable or disable the onboard LAN feature. The options are Enabled
and Disabled..
Onboard LAN1 Option ROM
Use this setting to select which option ROM is to be loaded for onboard LAN1 on the system.
Options include Disabled, PXE and EFI.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro H11SSL-I and is the answer not in the manual?

Supermicro H11SSL-I Specifications

General IconGeneral
ECCYes
Memory voltage1.2 V
Memory channelsOcta-channel
Memory slots type-
Supported memory typesDDR4-SDRAM
Maximum internal memory1024 GB
Supported memory clock speeds2666 MHz
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Number of DIMM slots8
PCI Express x8 (Gen 3.x) slots3
Supported DIMM module capacities8GB, 16GB, 32GB, 64GB, 128MB
BIOS typeAMI
ACPI version5.1
BIOS memory size128 Mbit
Wi-FiNo
LAN controllerIntel I210, Realtek RTL8211E
Ethernet interface typeGigabit Ethernet
On-board graphics card modelAspeed AST2500
Bundled softwareSuper Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM w/ dedicated LAN
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)8 - 90 %
Component forServer
Motherboard form factorATX
Number of SATA III connectors12
Trusted Platform Module (TPM) version1.2
Processor socketSocket SP3
Processor manufacturerAMD
Compatible processor seriesAMD EPYC
Supported storage drive interfacesSATA III
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width305 mm

Related product manuals