EasyManuals Logo

Supermicro H11SSL-I User Manual

Supermicro H11SSL-I
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #124 background imageLoading...
Page #124 background image
H11SSL Motherboard Series User's Manual
124
Click the icons showing a hand writing on the paper to view the readme les for each item.
Click a computer icon to the right of an item to install an item (from top to the bottom) one
at a time. After installing each item, you must reboot the system before proceeding with the
next item on the list. The bottom icon with a CD on it allows you to view the entire contents
of the CD.
When making a storage driver diskette by booting into a driver CD, please set the SATA
Conguration to "Compatible Mode" and congure SATA as IDE in the BIOS Setup. After
making the driver diskette, be sure to change the SATA settings back to your original settings.
A.2 SuperDoctor
®
5
The Supermicro SuperDoctor 5 is a hardware monitoring program that functions in a
command-line or web-based interface in Windows and Linux operating systems. The program
monitors system health information such as CPU temperature, system voltages, system
power consumption, fan speed, and provides alerts via email or Simple Network Management
Protocol (SNMP).
SuperDoctor 5 comes in local and remote management versions and can be used with
Nagios to maximize your system monitoring needs. With SuperDoctor 5 Management Server
(SSM Server), you can remotely control power on/o󰀨 and reset chassis intrusion for multiple
systems with SuperDoctor 5 or IPMI. SD5 Management Server monitors HTTP, FTP, and
SMTP services to optimize the e󰀩ciency of your operation.
Note: The default Username and Password for SuperDoctor 5 is admin / admin.
Note: The SuperDoctor 5 program and user’s manual can be downloaded from the Supermicro
website at http://www.supermicro.com/products/nfo/sms_sd5.cfm.
Figure A-2. SuperDoctor 5 Interface Display Screen (Health Information)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro H11SSL-I and is the answer not in the manual?

Supermicro H11SSL-I Specifications

General IconGeneral
ECCYes
Memory voltage1.2 V
Memory channelsOcta-channel
Memory slots type-
Supported memory typesDDR4-SDRAM
Maximum internal memory1024 GB
Supported memory clock speeds2666 MHz
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Number of DIMM slots8
PCI Express x8 (Gen 3.x) slots3
Supported DIMM module capacities8GB, 16GB, 32GB, 64GB, 128MB
BIOS typeAMI
ACPI version5.1
BIOS memory size128 Mbit
Wi-FiNo
LAN controllerIntel I210, Realtek RTL8211E
Ethernet interface typeGigabit Ethernet
On-board graphics card modelAspeed AST2500
Bundled softwareSuper Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM w/ dedicated LAN
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)8 - 90 %
Component forServer
Motherboard form factorATX
Number of SATA III connectors12
Trusted Platform Module (TPM) version1.2
Processor socketSocket SP3
Processor manufacturerAMD
Compatible processor seriesAMD EPYC
Supported storage drive interfacesSATA III
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width305 mm

Related product manuals