EasyManuals Logo

Supermicro H11SSL-I User Manual

Supermicro H11SSL-I
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
Chapter 4: BIOS (for EPYC 7001 Series)
89
Default Options
Restore Defaults
To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for maximum
performance.
Save as User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use
this feature to retrieve user-dened settings that were saved previously.
Boot Override Section
Listed on this section are other boot options for the system (i.e., Built-in EFI shell). Select an
option and press <Enter>. Your system will boot to the selected boot option.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro H11SSL-I and is the answer not in the manual?

Supermicro H11SSL-I Specifications

General IconGeneral
ECCYes
Memory voltage1.2 V
Memory channelsOcta-channel
Memory slots type-
Supported memory typesDDR4-SDRAM
Maximum internal memory1024 GB
Supported memory clock speeds2666 MHz
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Number of DIMM slots8
PCI Express x8 (Gen 3.x) slots3
Supported DIMM module capacities8GB, 16GB, 32GB, 64GB, 128MB
BIOS typeAMI
ACPI version5.1
BIOS memory size128 Mbit
Wi-FiNo
LAN controllerIntel I210, Realtek RTL8211E
Ethernet interface typeGigabit Ethernet
On-board graphics card modelAspeed AST2500
Bundled softwareSuper Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM w/ dedicated LAN
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)8 - 90 %
Component forServer
Motherboard form factorATX
Number of SATA III connectors12
Trusted Platform Module (TPM) version1.2
Processor socketSocket SP3
Processor manufacturerAMD
Compatible processor seriesAMD EPYC
Supported storage drive interfacesSATA III
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width305 mm

Related product manuals