13
Chapter 1: Introduction
Connector Description
M.2-C1, M.2-C2 M.2 Slots
PWRI2C Power supply SMBus I2C header
JIPMB1 4-pin External BMC I2C Header (for an IPMI Card)
LAN1, LAN2 Back panel LAN1, LAN2 connectors
VGA Back panel VGA port
NVMe0~5 NVMe slots 0~5
Note:Note: Jumpers, connectors, switches, and LED indicators that are not described in the Jumpers, connectors, switches, and LED indicators that are not described in the
preceding tables are for manufacturing testing purposes only, and are not covered in this preceding tables are for manufacturing testing purposes only, and are not covered in this
manual.manual.
To Next Page
Loading...
