MBI-6218G-T81X MicroBlade Module User’s Manual
5-2
5-2 BIOS Updates
It may be necessary to update the BIOS used in the blade modules on occasion.
However, it is recommended that you not update BIOS if you are not experiencing
problems with a blade module.
Updated BIOS files are located on our web site (http://www.supermicro.com/products/
microblade). Please check the current BIOS revision and make sure it is newer than the
revision you have.
To upload a new BIOS update, simply follow the Help instructions in the IPMI BIOS
Upload page (Figure 5-1) when you press the Help button at the top of the page. This
procedure will get you a BIOS Update.
5-3 Running Setup
Note: Default settings are in bold text unless otherwise noted.
The BIOS setup options described in this section are selected by choosing the
appropriate text from the M
AIN BIOS SETUP screen. All displayed text is described in this
section, although the screen display is often all you need to understand how to set the
options.
When you first power on the computer, the BIOS is immediately activated.
Figure 5-1. IPMI BIOS Upload Page with Help Upload Procedure
To Next Page
Loading...
