8
SuperServer 6019P-WT/WTR User's Manual
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the 6019P-WT/WTR. The
6019P-WT/WTR is based on the X11DDW-L motherboard and the SC815TQC-605WB/R706WB2
chassis.
In addition to the motherboard and chassis, several important parts that are included with
the system are listed below.
1.2 Unpacking the System
Inspect the box the SuperServer 6019P-WT/WTR was shipped in and note if it was damaged
who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
Be sure to read the precautions and considerations noted in Appendix B.
Main Parts List
Description Part Number Quantity
Passive Heatsink for 1U System SNK-P0067PSMB 2
4-cm Cooling Fan FAN-0156L4 4
Backplane BPN-SAS3-815TQ 1
Hot-swap Hard Drive Trays MCP-220-00075-0B 4
Air Shroud MCP-310-19019-0B 2
Riser Card RSC-R1UW-E8R 1
Riser Card RSC-R1UW-2E16 1
Rack Rail Mounting Kit MCP-290-00054-0N 1
To Next Page
Loading...
