Chapter 7: BIOS
7-21
View BMC System Event Log
This feature displays the BMC System Event Log (SEL). It shows the total
number of entries of BMC System Events. To view an event, select an Entry
Number and pressing <Enter> to display the information as shown in the screen.
• Total Number of Entries
• SEL Entry Number
• SEL Record ID
• SEL Record Type
• Timestamp
• Generator ID
• Event Message Format User
• Event Sensor Type
• Event Sensor Number,
Set LAN Confi guration
Set this feature to confi gure the IPMI LAN adapter with a network address as
shown in the following graphics.
• Channel Number - Enter the channel number for the SET LAN Confi g
command. This is initially set to [1]. Press "+" or "-" on your keyboard to
change the Channel Number.
• Channel Number Status - This feature returns the channel status for the
Channel Number selected above: "Channel Number is OK" or "Wrong
Channel Number".
IP Address Confi guration
Enter the IP address for this machine. This should be in decimal and in dotted
quad form (i.e., 192.168.10.253). The value of each three-digit number separated
by dots should not exceed 255 as shown in the screen below.
Parameter Selector
Use this feature to select the parameter of your IP Address confi guration.
To Next Page
Loading...
