C-2
X10DRC/i-LN4+/-T4+ Motherboard User’s Manual
Note: On the other hand, if the following screen displays, please load the
(You can do so by inserting a USB device that contains the new "Super.
ROM" image to your machine for BIOS recovery.)
installed on a bootable or non-bootable USB-attached device. However, the BIOS
-
To perform UEFI BIOS recovery using a USB-attached device, follow the instruc-
tions below.
1.
disc Root "\" Directory of a USB device or a writeable CD/DVD.
Note:
our website at www.supermicro.com to download the BIOS image into
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into
your USB drive and power on the system
3. While powering on the system, please keep pressing <Ctrl> and <Home> si-
multaneously on your keyboard until
.
Warning!! Please stop pressing the <Ctrl> and <Home> keys immediately when you
see the screen (or a similar screen) below; otherwise, it will trigger a system reboot.
To Next Page
Loading...
