Need help?Do you have a question about the Supermicro X10DRL-i SUPERO and is the answer not in the manual?
General| Form Factor | ATX |
|---|---|
| Chipset | Intel C612 |
| Integrated Graphics | ASPEED AST2400 |
| Socket | LGA 2011-3 |
| Memory Support | DDR4 ECC RDIMM and LRDIMM |
| Memory Slots | 8 DIMM slots |
| Storage | 10 SATA3 (6Gbps) |
| USB Ports | 4x USB 3.0 ports (2 rear, 2 via header) 6x USB 2.0 ports (2 rear, 4 via header) |
| RAID Support | RAID 0, 1, 5, 10 |
| IPMI | Yes, with dedicated LAN port |
| BIOS | AMI BIOS |
| Networking | Dual Gigabit Ethernet LAN ports (Intel i210) |
Step-by-step instructions for installing the CPU and its heatsink correctly.
Procedures for installing and removing DIMM memory modules safely and correctly.
Steps for mounting the motherboard into the chassis, including tools and standoffs.
General procedures for diagnosing and resolving system issues like no power or no video.
Steps to diagnose and fix issues related to system boot failures, including error beeps.
Guidance on identifying and resolving memory-related errors during system operation.
List of beep codes and their corresponding error messages for system diagnostics.
Procedure for recovering the UEFI BIOS image if the main BIOS block is corrupted.
Steps to recover BIOS using a USB-attached device without extra utilities.
To Next Page