Chapter 1: Overview
1-9
• Power-on mode for AC power recovery
• Intel
®
Intelligent Power Node Manager 3.0 (Avail-
able when the Supermicro Power Manager (SPM)
is installed and special power supply used. See
Page 1-14.)
• Management Engine (ME)
CPU
CPU Monitoring
Monitoring
• Onboard voltage monitoring for +3.3V, 3.3V Standby,
+5V, +5V Standby, +12V, CPU core, memory, chipset,
BMC, and battery voltages
• CPU/System overheat LED and control
• CPU Thermal Trip support
• Status Monitor for Speed Control
• Status Monitor for On/Off Control
• CPU Thermal Design Power (TDP): support up to
145W (See Note 2 below)
Fan Control
• Fan status monitoring via IPMI connections
• Dual Cooling Zone
• Low noise fan speed control
• Pulse Width Modulation (PWM) fan contorl
System
Management
•
2.0 support
•
• System resource alert via SuperDoctor 5
• SuperDoctor® 5, Watch Dog, NMI
• Chassis Intrusion Header and Detection
Dimensions
• 13.68" (L) x 13.05" (W) (347.47 mm x 331.47 mm)
Note 1: For SAS is supported by the onboard LSI3108 controller, and is
available on the X10DRC-LN4+/T4+ only)
Note 2: CPU Maximum Thermal Design Power (TDP) is subject to chassis
and heatsink cooling restrictions. For proper thermal management, please
Note 3
support/manuals/.
To Next Page
Loading...
