104
Serial Port for Out-of-Band Management/Windows Emergency Management
Services (EMS)
Band Serial Port management.
Console Redirection (for EMS)
options are Enabled and Disabled.
*If the item above set to Enabled, the following items will become available for user's
conguration:
Console Redirection Settings (for EMS) (Available when Console
Redirection set to Enabled)
Out-of-Band Mgmt (Management) Port
This feature selects a serial port in a client server to be used by the Windows Emergency
Management Services (EMS) to communicate with a remote host server. The default option
is COM2/SOL (Console Redirection).
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirection.
Select VT100 to use the ASCII character set. Select VT100+ to add color and function
UTF8 encoding to map Unicode characters into one or more bytes. The options are ANSI,
VT100, VT100+, and VT-UTF8.
Bits Per Second
This feature sets the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in both host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 57600, and 115200 (bits per second).
Flow Control
options are None,
The setting for each these features is displayed:
Data Bits, Parity, Stop Bits
To Next Page
Loading...
