Supermicro X11DAi-N - Appendix G: Configuring iSCSI Settings; G.1 PCIe;PCI;PnP Features

Appendix G: Conguring iSCSI Settings
195
Appendix G
Conguring iSCSI Settings
    
data transports between the iSCSI initiator and iSCSI target over an Internet protocol (IP)
network. The iSCSI initiator (client/host) enables a connection to the iSCSI target and initiates
I/O requests. The iSCSI target can be a group of storage devices or an intermediate device
attached to storage devices. The iSCSI initiator and iSCSI target must connect to an IP
network. To have iSCSI settings available, refer to instructions stated in the G.1 section. The
G.2 section explains iSCSI settings.
G.1 PCIe/PCI/PnP Features
Press <Del> during system boot to enter the BIOS Setup utility. Navigate to the Advanced

the menu items.
Note:
before starting iSCSI settings.