Supermicro X11DAi-N - Page 119

Chapter 4: UEFI BIOS
119
Delete 
delete the changes you've made on the namespace. Please note that all data contained
in the namespace will be deleted as well when you press <delete>.
Back to Namespaces
Back to Main Menu
Create Namespace
Use this submenu to create a namespace. The following information will display:
Name
Region ID
This feature displays the region ID of the DCPMM module. The options are 0x0001 and
0x0002.
Mode
Use this item to set the Namespace mode. The options are None and Sector.
Capacity Input
Select Remaining to use the maximum memory capacity currently available as system
memory capacity. Select Manual to enter the system memory capacity manually. The options
are Remaining and Manual.
Units
Use this feature to select the type of unit to use when inputting namespace capacity in the
system.
The options are B, MB, MiB, GB, GiB, TB, and TiB.
• Capacity: This feature displays the namespace capacity.
Back to Namespace
Select this feature and press <Enter> to go back to the Namespaces submenu.
Back to Main Menu
Select this feature and press <Enter> to go back to the Intel® Optane® DC Persistent
Memory Conguration menu.
Total Capacity
This feature allows the user to set the total DCPMM resource capacity allocated across all
segments in the host server.
• Raw Capacity