14
Motherboard Features
Peripheral Devices
•
• Two (2) USB 3.1 ports on the rear I/O panel (USB 9/10)
• Two (2) onboard USB 3.0 ports (USB 5/6) for front access
• One (1) Type A USB 3.0 connector (USB 7) for front access
BIOS
• 32 MB SPI AMI BIOS
®
SM Flash UEFI BIOS
•
SMBIOS 2.7 or later
Power Management
• Main switch override mechanism
•
• Intel® Intelligent Power Node Manager 4.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used)
• Management Engine (ME)
System Health Monitoring
• Onboard voltage monitoring for +3.3V, 3.3V standby, +5V, +5V standby, +12V, CPU core, memory, chipset, BMC, PCH
• CPU System LED and control
• CPU Thermal Trip support
•
• CPU Thermal Design Power (TDP) support of up to 205W (See Note 1 on next page.)
Fan Control
• Fan status monitoring via IPMI connections
• Dual cooling zone
• Multi fan speed control support via onboard BMC
• Pulse Width Modulation (PWM) fan control
System Management
• Trusted Platform Module (TPM) support
• PECI (Platform Environment Control Interface) 2.0 support
• System resource alert via SuperDoctor® 5
• SuperDoctor® 5, Watch Dog, NMI
• Chassis intrusion header and detection (Note: please connect a cable from the Chassis Intrusion header at JL1 to the
chassis to receive an alert via IPMI.)
LED Indicators
• CPU/Overheating
• Fan Failure
• LAN activity.
Dimensions
• 12" (L) x 13" (W) (304.8 mm x 330.2 mm)
To Next Page
Loading...
