Supermicro X11DAi-N - Page 46

46

Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
3.3V Stby
Ground
19
X
Ground
X
3.3V Stby
20
1 2
Ground
Power Fail LED
NIC2 Active LED
NMI
3.3V
3.3V
OH/PWR Fail/Fan Fail LED
1
2
1. PWR Button
2. Reset Button
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
󰀨
󰀨
is in suspend mode, press the button for 4 seconds or longer. Refer to the table below for

Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset

BIOS LICENSE
MAC CODE
BAR CODE
X11DAi-N
REV:1.01
Power Button
Pin Denitions (JF1)
Pins Denition
1 Signal
2 Ground
Reset Button
Pin Denitions (JF1)
Pins Denition
3 Reset
4 Ground