Supermicro X11DAi-N - Page 64

64

Watch Dog
JWD1 controls the Watch Dog function. Watch Dog is a monitor that can reboot the system
              
            
signal for the application that hangs. Watch Dog must also be enabled in BIOS. The default
setting is Reset.
Note: When Watch Dog is enabled, the user needs to write their own application
software to disable it.
1. Watch Dog
1
Watch Dog
Jumper Settings
Jumper Setting Denition
 Reset
 NMI
Open Disabled
BIOS LICENSE
MAC CODE
BAR CODE
X11DAi-N
REV:1.01