Supermicro X11DAi-N - Page 82


82

CPU Conguration
Warning: Setting the wrong values in the following sections may cause the system to malfunc
tion.

Processor Conguration
The following CPU information will be displayed:
• Processor BSP Revision
• Processor Socket
• Processor ID
• Processor Frequency
• Processor Max Ratio
• Processor Min Ratio
• Microcode Revision
• L1 Cache RAM
• L2 Cache RAM
• L3 Cache RAM
• Processor 0 Version
• Processor 1 Version
Hyper-Threading (ALL)

options are Enable and Disable.
Core Enabled


want to enable in a processor. Please note that the maximum of 24 CPU cores are currently
available in each CPU package. The default setting is 0.
Monitor/Mwait
Select Enable to enable the Monitor/Mwait instructions in the processor. The options are
Enable and Disable.
Execute Disable Bit (Available if supported by the OS & the CPU)
Select Enable for Execute Disable Bit support which will allow the processor to designate
areas in the system memory where an application code can execute and where it cannot,
          
damaging the system during a virus attack. The options are Enable and Disable. (Refer to
Intel and Microsoft websites for more information.)