Supermicro X11DPT-B - Page 15

15
Chapter 1: Introduction
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specications for proper CPU TDP sizing.
Note 2: For IPMI conguration instructions, please refer to the Embedded IPMI Con-
guration User's Guide available at http://www.supermicro.com/support/manuals/.
Note 3: It is strongly recommended that you change BMC login information upon initial
system power-on. The manufacturer default username is ADMIN and the password
is ADMIN. For proper BMC conguration, please refer to http://www.supermicro.com.