Supermicro X11DPT-B - Page 42

42
Super X11DPT-B User's Manual
DESIGNED IN USA
BAR CODE
BIOS LICENSE
IPMI CODE
1
+
X11DPT-B
REV:1.02
SXB1
SXB2
FAN3
FAN4
BMC_HB_LED1
UID_LED1
HDD_LED1
JPME1
SXB3_1
JSIOM1
SXB4
JSDCARD1
I-SATA6
JTAG1
JCPLD1
JRK1
BT1
JBT1
JF1
JF2
JNVI2C1
JTPM1
JSD1
CPU1 PCI-E 3.0 X4
CPU2 PCI-E 3.0 X24
I-SATA0~5
P2-DIMMF2 P2-DIMMF1
P2-DIMMD1
P2-DIMME1
P2-DIMME2 P2-DIMMD2
P2-DIMMC2
P2-DIMMC1
P2-DIMMA1
P2-DIMMA2
P2-DIMMB1 P2-DIMMB2
P1-DIMMF2 P1-DIMMF1
P1-DIMMC1
P1-DIMMC2
SIOM:CPU1 PCI-E 3.0 X16
CPU1 PCI-E 3.0 X4
S-SATA0~5
TPM/PORT80
CPU1 SLOT1 PCI-E 3.0 X16
COM1
IPMI_LAN
CPU2
PCH
USB0/1(3.0)
BIOS
FLASH
BMC
UID SW
VGA
CPU2 SLOT2PCI-E 3.0 X16
JSD1: SATA DOM POWER
CPU1
P1-DIMMD1
P1-DIMMD2
P1-DIMME1 P1-DIMME2
P1-DIMMA1 P1-DIMMA2 P1-DIMMB1 P1-DIMMB2
JVRM1
JPB1
JPG1
VGA Port
A VGA port is located on the I/O back panel. Use this port to connect to a compatible VGA
display.
2 3
1. VGA Port
2. UID Switch
3. UID LED
1
Unit Identier Switch/UID LED Indicator
A Unit Identier (UID) switch and an LED2 indicator are located on the motherboard. The UID
switch is located at JUIDB1, which is next to the DP port on the back panel. The UID LED is
located next to the UID switch. When you press the UID switch, the UID LED will be turned
on. Press the UID switch again to turn o󰀨 the LED indicator. The UID Indicator provides easy
identication of a system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website at http://www.
supermicro.com.
UID Switch
Pin Denitions
Pin# Denition
1 Ground
2 Ground
3 Button In
4 Button In
UID LED
Pin Denitions
Color Status
Blue: On Unit Identied