Supermicro X11DPT-B - Page 85

Chapter 4: UEFI BIOS
85
CPU1 Slot1 VMD Port 2A/CPU1 Slot1 VMD Port 2B/CPU1 Slot1 VMD Port 2C/
CPU1 Slot1 VMD Port 2D
Select Enable to enable Intel Volume Management Device Technology support for the
PCIe slot specied by the user. The options are Enable and the Disable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specied by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
*If Intel® VMD for Volume Management Device for PStack2 is set to Enable, the
following item will display.
CPU1 SXB1 M.2 VMD Port 3C/CPU1 JF2 M.2 VMD Port 3D
Select Enable to enable Intel Volume Management Device Technology support for the
PCIe slot specied by the user. The options are Enable and the Disable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specied by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
Intel® VMD for Volume Management Device on CPU2
VMD Conguration for PStack0/VMD Conguration for PStack1/VMD
Conguration for PStack2
Intel® VMD for Volume Management Device for PStack0/Intel® VMD for Volume
Management Device for PStack1/Intel® VMD for Volume Management Device for
PStack2
Select Enable to enable Intel Volume Management Device Technology support for the
root port specied by the user. The options are Enable and Disable.
*If Intel® VMD for Volume Management Device for PStack0 is set to Enable, the
following item will display.
CPU2 SXB2 NVMe/SAS VMD Port 1A/CPU2 SXB2 NVMe/SAS VMD Port 1B
Select Enable to enable Intel Volume Management Device Technology support for the
PCIe slot specied by the user. The options are Enable and the Disable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specied by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
*If Intel® VMD for Volume Management Device for PStack1 is set to Enable, the
following item will display.