Supermicro X11DPX-T - Save & Exit

Chapter 4: UEFI BIOS
167
4.8 Save & Exit
Select the Save & Exit tab from the BIOS setup screen to congure the settings below.
Save Options
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes to the
system conguration, and reboot the computer. Select Discard Changes and Exit from the
Exit menu and press <Enter>.
Save Changes and Reset
After completing the system conguration changes, select this option to save the changes
you have made. This will reset (reboot) the system.
Save Changes
When you have completed the system conguration changes, select this option to save all
changes made. This will not reset (reboot) the system.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the AMI BIOS
utility Program.
Listed on this section are other boot options for the system (i.e., Built-in EFI shell). Select an
option and press <Enter>. Your system will boot to the selected boot option.