Supermicro X11DPX-T - Special Features; Recovery from AC Power Loss; System Health Monitoring

20
Super X11DPX-T User's Manual
New features supported by 2nd Gen Intel Xeon Scalable-SP Series Processors
2nd Generation Intel Xeon Scalable-SP processors support the following features:
• Higher performance for a wider range of workloads with per-core performance increase
• Support of Optane DC Persistent Memory (DCPMM) with a󰀨ordable, persistent, and
large capacity (Refer to Section 1.7 for details.)
• Up to 2933 MHz memory supported
• Vector Neural Network Instruction (VNNI) support for Accelerate Deep Learning & Arti-
cial Intelligence (AI) workloads
• Speed Select Technology provides multiple CPU proles that can be set in the BIOS.
(This feature is available on select CPU SKUs).
• Seamless hardware security mitigations & performance/frequency exibility
Note: Support for 2933MHz memory and DCPMM memory is dependent on the CPU
SKU.
1.2 Special Features
This section describes the health monitoring features of the X11DPX-T motherboard. The
motherboard has an onboard ASPEED AST2500 Baseboard Management Controller (BMC)
that supports system health monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered o󰀨 (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
1.3 System Health Monitoring
This section describes the health monitoring features of the X11DPX-T motherboard. The
motherboard has an onboard Baseboard Management Controller (BMC) chip that supports
system health monitoring.