Supermicro X11DPX-T - Page 185

Appendix E: Conguring VROC RAID Settings
185
6. When the following screen displays, use the down arrow key to select Intel® VMD
Technology and press <Enter> to enter the Intel VMD Technology submenu.
7. When the Intel VMD Technology submenu appears, it will display all the PCI slots that
can be congured for VMD support on the screen.
8. From the available PCI slots displayed on the screen, select a PCI slot you want to use
for a VMD device by highlighting it.
9. Select the option [Enable] and press <Enter> to enable the selected slot for VMD
support.
10.Repeat Step 8 ~ Step 9 to select and enable all the PCI slots of your choice for VMD
support.
11. After enabling all PCI slots for VMD support on the BIOS Setup utility, install the VMD
devices (such as add-on cards) on the slots that you've congured for VMD support on
the motherboard. For the changes to take e󰀨ect,
12. Press <F4> to save the settings and exit the BIOS Setup utility. Press <Del> during
system boot to enter the BIOS Setup utility.
Note: After you’ve enabled VMD in the BIOS on a PCIe slot of your choice, this PCIe
slot will be dedicated for VMD use only, and it will no longer support any PCIe device.
To re-activate this slot for PCIe use, please disable VMD in the BIOS.