Supermicro X11DPX-T - Page 199

Appendix E: Conguring VROC RAID Settings
199
To Turn on the Disk Locator LED
Follow the instructions stated in the E.1 section to access the All Intel VMD Controllers
menu. When the following screen displays, select a non-RAID physical disk to turn on the
disk locator LED to locate a selected device.
You can also select a RAID member disk to locate the selected device.
When the following screen appears, use the arrow keys to select Turn Locate LED On. Press
<Enter> to turn on the locator LED to show the location of the selected device.