Supermicro X11DPX-T - Page 46

46
Super X11DPX-T User's Manual
UID LED
NIC1 Active LED
HDD LED
PWR LED
3.3V Stby
3.3V Stby
Ground
19
Ground
3.3V Stby
20
1 2
Ground
Power Fail LED
NIC2 Active LED
NMI
3.3V
3.3V
OH/PWR Fail/Fan Fail LED
Power Button
Reset Button
x
x
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin denitions.
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable here to indicate
the status of HDD-related activities, including IDE, SATA activities. See the table below for
pin denitions.
1
3
2
1. NMI
2. FP PWR LED
3. HDD LED
NMI Button
The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the
table below for pin denitions.
Power LED
Pin Denitions (JF1)
Pin# Denition
19 NMI
20 Ground
Power LED
Pin Denitions (JF1)
Pin# Denition
15 Vcc
16 FP PWR LED
Power LED
Pin Denitions (JF1)
Pin# Denition
13 Vcc
14 HDD LED