Supermicro X11SAE-M - Quick Reference Table

12
X11SAE-M User's Manual
Note: Table is continued on the next page.
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JI
2
C1/JI
2
C2 SMB to PCIE & PCI Slots Enable/Disable Pins 2-3 (Disabled)
JPAC1 Audio Enable Pins 1-2 (Enabled)
JPL1/JPL2 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watch Dog Pins 1-2 (Reset)
LED Description Status
LED1 Power LED Green: Power On
LED3 Standby Power LED On: Power On
Connector Description
AUDIO FP Front Panel Audio Header
B3 Onboard Battery
COM1 COM Header
FAN1 ~ FAN5 System/CPU Fan Headers (FAN1: CPU Fan)
HD Audio High-Dention Audio Connector
HDMI/DP High-Denition Multimedia Interface/DispalyPort
I-SATA0 ~ I-SATA7 Intel® PCH SATA 3.0 Ports
I-SGPIO1/I-SGPIO2 Serial Link General Purpose I/O Headers
J23 M.2 PCI-E 3.0 X4 Slot
JD1 Speaker/Buzzer (Pins 1-4: Speaker, Pins 3-4: Buzzer)
JF1 Control Panel Header
JL1 Chassis Intrusion Header
JLED1 3-Pin Power LED
JPW1 24-pin ATX Power Connector
JPW2 8-pin 12V Processor Power Connector
JSD1 SATA DOM Power Connector
JSTBY1 Standby Power Header
JTBT1 General Purpose I/O Header for a Thunderbolt add-on card
JTPM1 Trusted Platform Module/Port 80 Connector
LAN1/LAN2 Gb LAN (RJ45) Ports
MH9 ~ MH12 M.2 Mounting Holes
S1 BIOS Restore
SLOT4 PCH PCI-E 3.0 X4 Slot
SLOT5 PCI 33MHz Slot
SLOT7 CPU PCI-E 3.0 X16 Slot
SP1 Internal Speaker/Buzzer